Reason: To connect your printer to the network and communicate with the other devices and print wirelessly.
Setup HP Printer Wireless:
Method 1: Push Button Method
(Make sure your both the device router have WPS button and your printer support WPS method) If not equipped go to Method 2.
Step 1: Press the wireless button on the Printer.
Step 2: Go to Wi-Fi Protected setup or Wi-Fi standard setup.
Step 3: Select Push Button Method.
Step 4: Go to router and push the WPS button for 5 sec.
Step 5: Printer will say Connected to network and ask for you to print the report you can print the report.
If Printer says not connected or unsuccessful then repeat the steps or try Method 2.
Method 2: Wireless setup wizard
(Make sure you know the name of your network i.e. SSID and the password of your network)
Step 1: Press the wireless button on the Printer.
Step 2: Select wireless setup Wizard it will start searching for the available networks, and come up with the result.
Step 3: Once you see the name of your network Select it. Then it will ask for the Passphrase i.e. Wi-Fi password, enter your Wi-Fi password.
Step 4: It will attempt to connect to the network. Once successful it will ask for you to print the report you can print the report.
Step 5: if says unsuccessful make sure you selected the Correct SSID and Entered the Correct Password (password is uppercase and lowercase sensitive). Try again from Step 1 or use the Method 1.
Once you are connected to the network you can communicate from any of your device to the printer.
The post How to make printer wireless appeared first on PCASTA Technical Support.